VDX-6318 Windows Embedded Compact 7 - Getting Started Guide
Windows Embedded Compact 7 Getting Started Rev 2.00
Page 56
From the
Configure TCP/IP Transport
screen, select the
Use specific IP address
option, and
enter the target device’s
IP address
from the earlier step.
Click
OK
to continue and close the
Configure TCP/IP Transport
screen.
Click
OK
to continue and close the
Vortex86DX_SDK_Compact7 x86 Device Properties
screen.
Click
OK
to continue and close the
Options
screen.
Establish Connectivity to Compact 7 Target Device
To initiate connectivity to the target device, select
Tools → Connect to Device
from the VS2008
menu to bring up the
Connect to Device
screen, as shown in Figure 52.
Fig. 52 -
Connect to Device
If it’s not already selected, select
Vortex86DX_SDK_Compact7
from the Platform selection.
Click
Connect
to establish connectivity, and bring up the
Connecting
screen.
Upon a successful connection, the
Connecting
screen displays the
Connection succeeded
message, as shown in Figure 53.
Fig. 53 -
Connection succeeded
Click
Close
to close the
Connecting
screen and continue.