ICOP Technology PBSW-090T-8A-E8-4G, Руководство пользователя

Страница: 16 / 49

PBSW-090T
User’s Manual
IUMPBSW090T-01 Ver.1.4A Jan, 2022
11
1.5 Mounting Instruction

Panel Mounting

Cut a mounting hole in the panel. (Refer to PBSW
‐
090T Dimensions on page 10) (Note 1)

Check and remove the twelve M3 screws in a diagonal pattern as image below if necessary.

Place PBSW
‐
090T face
‐
down on a clean, flat surface.

Slide the panel cutout around the back of PBSW
‐
090T, until the panel rests directly on the
gasket. Make sure the screw holes align with the screw holes on PBSW
‐
090T.

The screw size is M3*L (L=wall thi 6.0mm) (Note 2)

Insert all twelve M3 screws into the screw holes. (Note 2)

Finger-tighten the M3 screws. Finish tightening the M3 screws in a diagonal pattern using an M3
screw driver (see the image as below); maximum torque 1.18Nm (12 kgf
‐
cm).