i'coo Targo, Инструкция по эксплуатации

Страница: 21 / 48

13
Place the seatframe on top of this (10b). note that the opening of
the central locking part is visible. Slide the frame into the pocket, the
seatrecline grip must correspond with opening in the back (10c).
Close the 2 zippers on the side of the seat around the frame (10d-e).
Wrap the side-flap of the seat around the central connection point
and close this with the zippers (10f). Zip the canopy to the back of
the seat-unit (10f). Zip the fabric around the tube on the footrest
(10g). then close the buckle underneath the seatplate (10g).
the seat is now fully assembled (10h).
FrontBar
Place the frontbar by sliding the connection parts on the rail that is
placed on the central connection part (11a).
to adjust the frontbar push the buttons on both sides simultaneously
and rotate to the desired angle (11b).
PLaCIng the targo Seat unIt
take the seat unit with your hands placed on the central plastic
connector and place the seat to the engaging pins on the frame until
the locking mechanism on both sides audibly and visibly click into
place (12a).
reMoVIng the Seat FroM the FraMe
to remove the seat or pram from the frame you have to push the
unlock buttons on both sides of the central connection part and lift
the unit vertically (12b).
you can place the seat in 2 directions, facing forward or facing the
parent. Check that the seat is securely fit by lifting the seat (12c).
adJuStIng the Seat heIght
See adJuStIng the Seat heIght of Instruction CIty-FraMe or
Instruction Country-FraMe (12d-e).
adJuStIng the BaCKreSt
to adjust the backrest push the button on the top of the seatframe
and adjust the seat to the desired position (13a).
adJuStMentS oF the FootreSt
to adjust the footrest push the buttons on both sides simultaneously
and rotate to the desired angle (13a).
adjustment of the footrest height to adjust the height of the footrest
for a bigger child, simply remove the footrest cushion and store it in
the basket (13b).
adJuStMent oF the headreSt
to adjust the position of the headrest, release the Velcro strap on the
back of the headrest and place it in the next two loops (13c).
raInCoVer
the seat has a built in raincover hidden on the back of the footrest.
open the zipper on the back of the footrest and takeout the
raincover (14a). Connect the top of the raincover around the
frontbar with the three snapbuttons (14b).
a separate PVC raincover is also available, when walking through
heavy rain. Place the cover over the seat unit, attach the cover
around the frame with the Velcro strips on the side and on the
footrest.
5-PoInt SaFety BeLt
Begin by fitting and locking the crutch strap and the waist strap.
then fit the shoulder straps and hook them into the waist strap (15).
adjust the straps to fit your child. Warning - to prevent injury always
secure your child with the safety belt!
PLaCIng the LIFeSaVer CarSeat
Place the Lifesaver carseat to the engaging pins on the frame, with
child facing the parent (16a). unlock the red button on the handle
and rotate the handle to the back until the locking mechanism on
both sides audibly and visibly click into place (16b). Check that the
carseat is securely fit by lifting the carseat.
gB