i'coo peak 4, Инструкция по эксплуатации

Страница: 22 / 60

16 16
INSTRUCTION OF USE INSTRUCTION OF USE
1. SCOPE OF DELIVERY 1. SCOPE OF DELIVERY
• frame including 4 wheels
• seat, hood and bumper bar
2. ASSEMBLY FIG. 1,2 2. ASSEMBLY FIG. 1,2
Undo the transport safeguard. Unfold the push-chair
upwards, Pull the handle upwards until the catches on
both sides have audibly and visibly latched in.
3. MOUNTING THE REAR WHEELS FIG. 3 3. MOUNTING THE REAR WHEELS FIG. 3
Lay the frame on the ground. Now slide the two rear
wheels onto the rear wheel blocks until you hear a
CLICK. Pull them to check that they are secured.
4. MOUNTING THE FRONT WHEELS FIG. 3 4. MOUNTING THE FRONT WHEELS FIG. 3
The front wheels are mounted in the same way as
described under point 3.
5. MOUNTING THE SPORTS CAR ATTACHMENT FIG. 4-5 5. MOUNTING THE SPORTS CAR ATTACHMENT FIG. 4-5
Install the sports car attachment with the appropriate
guides on the bottom onto the cross rods on the
undercarriage. If installed correctly, it should latch in
automatically. It is essential to check that it is properly
secured.
Remove the sports car attachment by pressing the
release levers which are built into the two insets of
the attachment.
6. MOUNTING THE HOOD FIG. 6 6. MOUNTING THE HOOD FIG. 6
Fasten the hood by pushing it into the hood retainer
provided in the direction of the arrow until you hear it
latch in with a soft click.
7. HOOD TIGHTENER FIG. 7,8 7. HOOD TIGHTENER FIG. 7,8
Tighten the hood by pressing the hood tightener in
direction of the arrow.
8. MOUNTING THE FRONT SHACKLE FIG. 9 8. MOUNTING THE FRONT SHACKLE FIG. 9
Fasten the front shackle by pushing it into the retainer
provided in the direction of the arrow until it latches in
with a soft click.
GB GB