iControl Standard, Руководство по эксплуатации

Страница: 16 / 28

04 FIRST APPLICATION
04.2
Procedure for stopping and disconnec-
ting the pivot
_
The following stopping sequence should be used:
• Set the Start Switch to “OFF”
• Turn the Main Switch to “OFF”.
• Disconnect the automatic differential inside the panel or at the pumping station when the machine is not going to be used
for some time.
DANGER: Even if the Main Switch on the control panel has been disconnected, there still might be 480/380 VAC in the panel if the main
power supply has not been turned off.
WARNING: To avoid damage to the machine, always disconnect the Start Switch first, and then the Main Switch.
WARNING: The internal door of the panel will not open until the Main Switch is set to “OFF”.
04.3
Machine emergency stop
_
All our pivots are fitted with a disconnect switch on every tower, This ON / OFF switch is in the lower part of the tower box. Turning
this to “OFF” will stop the whole machine by interrupting the safety circuit.
WARNING: This switch is only to disconnect the machine and should ONLY be used in an emergency.