iControl Standard, Руководство по эксплуатации

Страница: 15 / 28

15
04 FIRST APPLICATION
04.1
Starting the pivot
_
It must be kept in mind that the pivot can be started in either Manual or Automatic mode.
The following starting sequence should be used:
• Turn the Main Switch to “ON”.
• The panel voltmeter should indicate the supply voltage at that moment.
• Select the desired speed in the Percentage Timer.
• Set the Irrigation Switch to the desired position.
• Move the Direction Switch to the desired position, left, right or Auto-Reverse.
• Choose either Manual or Automatic start.
• Set the Start Switch to the on position to activate the safety and closing circuits and, as determined by the mode chosen:
- Manual: Once the switch is turned to Start, the machine should get under way.
- Automatic: If the panel is energized, the pivot will start automatically.
• Check the indicator lights on the control panel to verify that all is working properly. The following indicators should be lit up,
depending on the direction:
Left Right
Machine activated
Reverse (right)
Forward (left)
Last tower moving
Safety closed
DANGER: Before programming or starting the system, ensure that no person, animal or vehicle that could suffer damage is within the
range of the machine.
DANGER: Pay close attention to high-voltage pylons and cables. Do not water close to them or on roads.
WARNING: Make sure there are no irregularities or obstacles (buildings, trees…) on the ground which could cause structural damage
to the machine.