English 1/4
Congratulations on the purchase of your new kick e-scooter. The information in this User Manual will help you better understand, enjoy and maintain your kick e-scooter.
PLEASE READ THE USER MANUAL THOROUGHLY BEFORE OPERATING . Always wear the proper safety gear before operating.
Enjoy your kick e-cooter!
WARNING!
IMPROPER USE OF THE SCOOTER AND/OR FAILURE TO READ THIS USER MANUAL MAY LEAD TO SERIOUS BODILY INJURY AND DEATH.
Kick e-scooters are powered vehicles and they are illegal to ride on the pavement or roads of the UK under section 72 of the Highway Act 1835, and in Scotland under
the Roads (Scotland Act 1984).
For more information, please visit
http://www.cps.gov.uk/legal/p_to_r/road_traffic_offences/#dot
.
1. Product Overview
1.1. General Information
The original kick e-scooter is an intuitive, technologically advanced solution.
Using the latest technology and production processes, each scooter undergoes strict
testing for quality and durability. With its lightweight, portable design, ease of use, range, and low carbon footprint.
1.2. What You Need To Know
Before you first experience your kick e-scooter, please read the USER MANUAL thoroughly and learn the basics to ensure your safety and the safety of others.
WARNING!
Failure to follow the basic instructions and safety precautions listed in the USER MANUAL, can lead to damage to your scooter, other property damage,
serious bodily injury, and even death.
2.4. LCD Display
1. BATTERY
Displays an estimate of the battery strength that remains before requiring a
recharge. A fully charged battery (100%) will show 6 bars.
Please remember to charge your battery when it is on it's last bar. As the battery
depletes, the strength of the motor will get weaker.
2. GEAR
The gear can be toggled from Gear 1 to Gear 3, by pressing on SPEED + or SPEED -.
Each gear setting will give a different level of acceleration and maxium speed.
Gear 1: Slow Acceleration. Gear 2: Medium Acceleration. Gear 3: Fastest Acceleration.
3. DISTANCE
This serves as an ODOMETER that keeps track of the total distance accumulated
on the kick e-scooter. It can also show other settings, refer to OPERATION page.
4. SPEED
This serves as a Speed Meter which will display the current speed you are
travelling at, in KM/H.
2. Product Description
2.1. Assembly
The kick e-scooter can be assembled within 2 minutes:
• Install the Handlebars and tighten the screws.
• Fasten the two screws at the top of the steering column.
2.2. Folding
The Smart Kick Scooter can be folded in a few
seconds at the press of a single lever.
•
Press down the Lever to fold the kick e-scooter.
Do not turn the handlebar while you are folding.
Keep it straight. Gently bring the steering column
down until it locks in place.
2.3. Unfolding
You
can unfold the kick e-scooter without
any inconvenience in seconds.
•
Press against the button lever, and gently bring
the steering column up until it locks in place.
Only pull the steering column after pressing
the lever. Pull gently.
1
SPEED +
ON / OFF
SPEED -
4
2 3
Helmet
Ellbow Pads
Knee Pads
3. Operating Principles
3.1. Operation
•
Hold the ON/OFF Button for 2 Seconds to turn the scooter OFF or ON.
• Pressing the ON/OFF Button for 0.5 Seconds will show different
display settings:
DIS: Current mileage accumulated.
Can be reset by holding the (SPEED+) button.
ODO: Total accumulated mileage since riding the kick e-scooter. This can not be reset.
VOL: Displays the current battery voltage.
RPM: Displays the motor speed.
TIME: Shows how long the scooter has been turned on for.
3.2. How to ride your kick e-scooter
• Switch on the kick e-scooter.
• Stand with a foot on the footboard.
• Manually kick the scooter forward for initial speed (the motor will not engage
from a standing start).
•
The accelerator lever is located below the LED screen, press the lever down to
accelerate and release to decelerate.
•
The hand operated front brake is located on the handle bars, press the lever down
progressively to deccelerate.
•
The foot operated rear brake is activated by applying progressive pressure with your foot.
3.3. PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY
Step 1:
Getting Started
Take your scooter out of the box and place it flat on the floor.
Step 2:
Charging your kick e-scooter
Make sure the kick e-scooter is fully charged before your initial use. For charging instructions, please follow details in Section 8 under
Battery and Charging Specifications.
Step 3:
Wear all proper safety gear, including, but not limited to a helmet, knee pads, elbow pads, and wrist guards.
