Iconasys 2013- 2018 ©
5.
Place platform back on turntable then place object in the center of the
platform – standing upright using the wax:
Installing Shutter Stream 360 Software:
1.
Download Hardware Drivers:
Windows:
http://iconasys.com/Downloads/arduino-1.6.5-r5-drivers.zip
Unzip the folder and launch the following application file for your
corresponding OS:
Windows 32 Bit:
dpinst-x86.exe
Windows 64 Bit:
dpinst-amd64.exe
Mac OS X
–
There is no need to install drivers for Mac OS X
2.
Download Shutter Stream 360 using either of the following links:
Windows: www.iconasys.com/Downloads/ShutterStream-Windows.exe
Mac: www.iconasys.com/Downloads/ShutterStream-Mac.pkg
3.
Connect Turntable through USB to computer then Launch Shutter
Stream -> Click 360 button in top right of UI -> Select ‘Arduino’ option ->
it should then initialize and recognize the table.
If for any reason the turntable cannot be recognized by the Shutter Stream 360
program, please download and install this application and follow these steps:
