14
26. Attach a 90mm Pulley (48) inside the Upright
(3), over the Low Cable (53), with an M10 x
78mm Button Bolt (71), two M10 Washers (57),
two 19mm Spacers (33), and an M10 Nylon
Locknut (56).
28. Route the Low Cable (53) under a 90mm Pulley
(48). Insert an M10 x 52mm Button Bolt (66)
through two Half Guards (43), the Base (1), and
the Pulley.
Make sure the Half Guards are on
the outside of the bracket as shown.
27. Route the Low Cable (53) over a 90mm Pulley
(48). Attach the Pulley and two Half Guards
(43) to the Double “U”-bracket (63) with an M10
x 45mm Button Bolt (81) and an M10 Nylon
Locknut (56).
Make sure the Half Guards are
on the outside of the Double “U”-bracket as
shown.
26
27
28
25. Attach a 90mm Pulley (48) inside the Front Leg
(7), over the Low Cable (53), with an M10 x
78mm Button Bolt (71), two M10 Washers (57),
two 19mm Spacers (33), and an M10 Nylon
Locknut (56).
25
56
7
53
33
33
57
57
48
71
56
3
53
33
33
57
57
48
71
56
53
48
43
43
63
81
53
48
43
1
43
66
