ICON QBIT4000A, Руководство по установке оборудования

Страница: 28 / 39

Connection
21
Figure 25 5-Pin 5.08mm-Spacing Plug-in Terminal Block (socket)
Table 8 Pin Definitions of 5-Pin 5.08mm-Spacing Plug-in Terminal Block
No. Signal DC Definition AC Definition
1 +/L PWR1: + PWR1: L
2 -/N PWR1: - PWR1: N
3 PGND PGND
4 -/N PWR2: - PWR2: N
5 +/L PWR2: + PWR2: L

Wiring and Mounting
Step 1: Ground the device properly according to section 4.5.
Step 2: Remove the power terminal block from the device.
Step 3: Insert the power wires into the power terminal block according to Table 7
、
Table 8
and secure the wires.
Step 4: Insert the terminal block with the connected wires into the terminal block socket on
the device.
Step 5: Connect the other end of the power wires to the external power supply system
according to the power supply requirements of the device. View the status of the
power LEDs on the front panel. If the LEDs are on, the power is connected properly.
Wiring and Mounting should meet following specifications.
Table 9 Wiring and Mounting Specifications
Terminal Type Required Torque Wire Range (AWG)
Terminal Block Plug 4.5-5.0 lb-in 12-24
ICON Industrial Engineering (IIE)