Switch Access
28
Figure 29 Setting Port Parameters
Step 6: Click OK to enter the switch CLI. Then the following commands can be used to
perform operations.
Table 12 CLI Commands
View
Command
Description
Privileged mode
SWITCH#show interface vlan 1
Query the IP address of the switch.
Privileged mode
SWITCH#show version
Query the version of the switch.
Privileged mode
SWITCH#reboot
Restart the switch.
Privileged mode
SWITCH#load default
Restore the factory default settings .
Privileged mode
SWITCH#config terminal
Enter the configuration mode.
7.2 Access through Telnet
Step 1: Connect the network port of a PC to the Ethernet port of the switch with a network
cable.
Step 2:
Op
e
n Putty in Windows OS.
Select "Telnet"
Enter
IP adress of the device
.
For
example, if the IP address of the device is 192.168.0.2 (default
IP)
ICON Industrial Engineering (IIE)
