12
9
5
86
87
10
10. IMPORTANT: To avoid damaging the Pulse
Crossbar Bottom (95), do not use power
tools and do not overtighten the #10 x 3/4"
Screws (9).
Attach the Pulse Crossbar Bottom (95) to the
Handrails (86, 87) with four #10 x 3/4" Screws
(9) and four #10 Star Washers (5); start all four
Screws, and then tighten them.
95
11
92
F
87
79
85
23
23
11. Identify the Right Handrail Cover (92). Set the
Right Handrail Cover on the Right Handrail (87),
and start two #8 x 3/4" Truss Head Screws (23)
into the bottom of the Right Handrail Cover; do
not fully tighten the Truss Head Screws.
Next, slide the Right Handrail Cover (92) for-
ward until it rests against the console assembly
(F). Then, tighten the two #8 x 3/4" Truss Head
Screws (23); do not overtighten the Truss
Head Screws.
Then, attach the Right Bottom Handrail Cover
(84) with three #8 x 3/4" Truss Head Screws
(23); start all three Truss Head Screws, and
then tighten them.
Attach the Left Handrail Cover (79) and the
Left Bottom Handrail Cover (85) in the same
way.
84
23
9
5
23
