ICON PRO-FORM CYCLE TRAINER 400 Ri, Руководство пользователя

Страница: 9 / 28

9
4
5
4. Orient the Upright (3) as shown.
Tip: Avoid pinching the Main Wire (31). Attach
the Upright (3) to the Front Frame (1) with four
M8 x 16mm Screws (35);
start all the Screws,
and then tighten them.
Next, locate the wire tie (A) in the Upright (3).
Tie the lower end of the wire tie to the Main Wire
(31). Then, pull the upper end of the wire tie until
the Main Wire is routed through the Upright.
Tip: To prevent the Main Wire (31) from fall-
ing into the Upright (3), secure the Main Wire
with the wire tie (A).
Then, insert the excess Main Wire (31) into the
Upright (3).
3
31
35
1
Avoid pinching
the Main Wire (31)
A
A
5. Orient the Rear and Front Shield Covers (9, 19)
as shown.
Press the Rear and Front Shield Covers (9, 19)
together around the Upright (3), and join them
with two M4 x 12mm Screws (61).
Then, press the Rear and Front Shield Covers
(9, 19) downward onto the Left and Right Shields
(17, 18). Attach the Rear Shield Cover with two
M4 x 16mm Screws (8).
9
8
8
19
17, 18
61
61
3