background image

31

SYMPTOM: The incline of the treadmill does not 
change correctly

a.     Calibrate the incline system (see step 3 on page 25).

 SYMPTOM: The walking belt slows when walked on

a. 

 

Use only a surge suppressor that meets all of the 
speci

fi

 cations described on page 19.

b.  

If the walking belt is overtightened, treadmill per-
formance may decrease and the walking belt may 
become damaged. Remove the key and 

UNPLUG 

THE POWER CORD.

 Using the hex key, turn both 

idler roller screws counterclockwise, 1/4 of a turn. 
When the walking belt is properly tightened, you 
should be able to lift each edge of the walking belt 
2 to 3 in. (5 to 7 cm) off the walking platform. Be 
careful to keep the walking belt centered. Then, 
plug in the power cord, insert the key, and walk on 
the treadmill for a few minutes. Repeat until the 
walking belt is properly tightened.

c.  

Your treadmill features a walking belt coated with 
high-performance lubricant. 

IMPORTANT: Never 

apply silicone spray or other substances to 
the walking belt or the walking platform unless 
instructed to do so by an authorized service 
representative. Such substances may deterio-
rate the walking belt and cause excessive wear.

 

If you suspect that the walking belt needs more 
lubricant, see the front cover of this manual.

d.  

If the walking belt still slows when walked on, see 
the front cover of this manual.

SYMPTOM: The walking belt is not centered 
between the foot rails

a. 

 

  

IMPORTANT: If the walking belt rubs against 
the foot rails, the walking belt may become 
damaged. 

First, remove the key and 

UNPLUG 

THE POWER CORD.

 

If the walking belt has 

shifted to the left,

 use the hex key to turn the 

left idler roller screw clockwise 1/2 of a turn; 

if the 

walking belt has shifted to the right,

 turn the 

left idler roller screw counterclockwise 1/2 of a 
turn. Be careful not to overtighten the walking belt.

 

Then, plug in the power cord, insert the key, and 
walk on the treadmill for a few minutes. Repeat 
until the walking belt is centered. 

Idler Roller Screws

2–3 in.

b

a

Содержание PRO-FORM COACHLINK T 9.0









































Отзывы: