ICON NTL29012.1, Руководство пользователя

Страница: 13 / 48

13
6. Remove the four 3/8" x 1" Screws (2) from the
Uprights (97).
Orient each Handrail Bracket (85) so that the
long tab is in the position shown and the large
holes are on top. Route the Upright Wire (84)
and the Upright Coaxial Cable (115) through the
center hole in each Handrail Bracket.
Attach each Handrail Bracket (85) with the two
3/8" x 1" Screws (2) and two 3/8" Star Washers
(12).
Start all four Screws, and then tighten
them.
2
12
85
84
2
Long
Tab
Large
Holes
12
85
Long
Tab
6
97
97
115
7. With the help of a second person, hold the hand-
rail assembly near the left Upright (97).
Connect the Upright Wire (84) to the Handrail
Wire (86).
See the inset drawing. The connec-
tors should slide together easily and snap
into place.
If they do not, turn one connector
and try again. IF YOU DO NOT CONNECT THE
CONNECTORS PROPERLY, THE CONSOLE
MAY BECOME DAMAGED WHEN YOU TURN
ON THE POWER.
Then, remove the wire tie
from the Upright Wire.
Repeat with the Coaxial Cables on the other
side (not shown).
Handrail
Assembly
Wire
Tie
86
97
84
84
86
7