ICON Inspire 5air Скачать руководство пользователя страница 49

Страница: 49 / 56

Section 8
Technical and Service Information

Caution:

Electro Static Discharge, Electrical Fast Transient and Conducted RF

interference may cause the unit malfunctioning. In such cases, unplug the unit

and plug it in again to restore normal operation.

Note:

Your InSpire-air product has been tested to comply with FCC Standards

FOR HOME OR OFFICE USE. Modifications not authorized by the manufacturer

may void users authority to operate this device.

Note:

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the

following measures:

Re-orient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment to an outlet on a circuit different from that to which

the receiver is connected.

Consult the dealer or an experienced radio/ TV technician for help.

Technical

If your InSpire-air needs servicing, follow these instructions.

1. Ensure the problem is not related to operation error or external system

devices.

2. Keep this owner's manual. We don't need it to repair the unit.

3. Pack the unit in its original packaging including end card and box. This is

very important. If you have lost the packaging, please make sure you

have packed the unit properly. ICON is not responsible for any damage

that occurs due to non-factory packing.

4. Ship to the ICON tech support center or the local return authorization.

U.S. OFFICE:

ICON Digital Corp.

2222 Pleasant View Road Suite #1 Middleton, WI 53562 USA

ASIA OFFICE:

ICON (Asia) Corp.

Unit 807-810, 8/F., Sunley Centre,

No. 9 Wing Yin Street, Kwai Chung, NT., Hong Kong.

5. For additional update information please visit our website at:

www.icon-global.com

Service

Содержание Inspire 5air

























































Результаты поиска

Содержание Inspire 5air

Отзывы:

Бренды по названию

Популярные бренды

ICON Inspire 5air, Руководство пользователя

Результаты поиска

Содержание Inspire 5air

Отзывы:

Бренды по названию

Популярные бренды