ICON Inspire 5air, Руководство пользователя

Страница: 42 / 56

The P1, 2 and 3 layers works the same way for the pads. You can have one set
for notes, one set for drum sounds, or any combination. To use these layers,
their CC and MIDI channel assignments must first be programmed and stored
in an F slot. Follow the procedures above, using the MIDI implementation and
CC number charts from the manual of the device you are going to control.
Then, use the SAVE (Ad Save) function when an entire layer is
completely assigned. Go on to the next one, and a third if you need it, and
repeat the process until all 27 faders, 24 knobs and 24 pads have been
assigned. Each F-slot can contain the saved assignments for all three layers of
faders, knobs and pads.
Michael says: ”Just because you are using three layers does NOT mean
that all three sets of controls need to be different. If
some parameters are common to all three groups, just
keep them the same, and only change the ones that
need to vary.”
38