ICON Inspire 5air, Руководство пользователя

Страница: 17 / 56

Joystick
The Joystick is used to control Pitch Bend and Modulation effects. The pitch bend
value and function are fixed, so that the side-to side motion of the joystick will
bend a pitch up or down one whole step. Moving the stick left bends pitch down,
moving it right bends it up. The joystick has a relatively large default area in the
center, for easy return to “no bend” or “no modulation”. The pitch bend function
is spring-loaded, and will return to default, “0” when released. The modulation
function moves freely, and must be returned to 0 by the user. The up/down
motion of the joystick produces a modulation effect only when pushed upward,
or forward. So, moving it past the center downwards is a secure way to remove a
modulation effect without having to hit center exactly.
The forward/backward motion of the joystick is both programmable and
assignable. For instance, you may want to control L/R panning with the joystick.
To assign this kind of function, look at a MIDI CC implementation chart. Find the
function you want, in this instance Pan, which is MIDI CC 10. Press Cntrl Assign,
then activate the up/down function of the joystick. The current CC number will
appear. It will be 1, for modulation. Use the jogwheel or numbered buttons to
select MIDI CC number 10. Press the Cntrl Assign button again. It will go dark. The
up/down joystick will now cause the L/R stereo field to move as you move the
joystick, down for pan left, and up for pan right, just like a knob or fader.
Any linear CC can be assigned and programmed for the joystick with a similar
procedure. However, the modulation function will remain enabled, in addition to
the other assigned function.
Michael Says:
X/Y Touch Pad
The X/Y Pad allows you to manipulate any software function that allows
visual/tactile user control and is enabled by the manufacturer. The pad will trace
your finger movements, enabling you to create filter envelopes, waveforms or
velocity curves, or to set pan, volume, effects or any other linear functions made
available by the software. Look in your software owner's manual for these options.
There will be special instructions for using touchpads. The MIDI CC numbers for
InSpire-air's touchpad are CC 103 for the Y axis and CC 104 for the X axis.
“The joystick can be used for lots of non-audio mixing
functions. If you want to get 'spontaneously artistic' with
your mixing, assign a control like pan, reverb, or a VST
plug-in effect, to the joystick and EXPRESS yourself!”
13