Restore the factory default settings
To restore your iCreativ settings to factory default, simply import the
“Factory Default” setting file into your iCreativ with the original setting
of the iMap software.
Connect the next of the i-series controllers
Insert the wide (flat) end of the USB cable to the first i-series controller 's
second USB port and the other small end (B-type USB jack) to the second
i-series controller's USB port
Note: Due to the limitation of power supply via USB port, your connected devices
chain might excess the power supply limit of the USB port and cause malfunction.
For recommendations on the combination and daisy chain sequence of different
i-series controllers, please visit the ICON website at the following link:
www.icon-global.com
Daisy Chain with iCreativ or any i-series Controllers
You may daisy chain i-series controllers including iCreativ. As i-series
controller is USB bus-powered the stability depends on the total power
demand of the chain. Please visit our website for recommendations on
daisy chain sequence for different i-series controllers.
Connect the first of the i-series controllers to your Mac/PC
via the USB port
Select a USB port on your Mac/PC and insert the wide (flat) end of the USB
cable and the other small end (B-type USB pack) to i-series controller.
Con tro ls
e1
Layer
e2
e3
e4
e5
e6
e7
e8
e9
1
2
3
4
f1
f2
f3
f4
f5
f6
f 7
f8
f9
-
+
USB2.0 Cable
