2
3.
Remove the track bar bolt at frame.
[FIGURE 3]
4.
Lower the front axle until the coils can be removed from vehicle.
[FIGURE 4 & 5]
5.
Remove the lower coil mount with a 22mm socket/wrench and the lines attached to it using 10mm socket/wrench.
[FIGURE 6 & 7]
6.
Remove the inner fender liner.
7.
With a reciprocating saw and a 10” blade, use the coil bucket as a guide and cut out the centering cup from the upper coil mount
on both driver and passenger side.
[FIGURE 8]
8.
Grind any material that keeps the upper coil bucket from being smooth and flat.
[FIGURE 9]
FIG.4
FIG.5
FIG.6
FIG.7
FIG.9
FIG.8
FIG.3
