background image

21

FCC INFORMATION

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference 
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does 
cause harmful interference to radio or television reception, which can be determined by turning the equipment off 
and on, try to correct the interference by one or more of the following measures: 

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and the receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 
•  Consult the dealer or an experienced radio/TV technician for help. 

FCC CAUTION: To assure continued compliance, use only shielded interface cables when connecting to 
computer or peripheral devices. Changes or modifications not expressly approved by the party respon-
sible for compliance could void the user’s authority to operate this equipment.

IMPORTANT: To satisfy exposure compliance requirements, the antenna and transmitter in the console 
must be at least 8 in. (20 cm) from all persons and must not be near or connected to any other antenna or 
transmitter.

Note: The console contains FCC ID: OMCBBICON14.

Содержание PRO-FORM SPORT CX





























Отзывы: