background image

13

HOW TO LEVEL THE EXERCISE BIKE

If the exercise bike 

rocks slightly on your 

floor during use, 

turn one or both of 

the leveling feet (A) 

beneath the rear 

stabilizer until the 

rocking motion is 

eliminated.

HOW TO ADJUST THE ANGLE OF THE SADDLE

You can adjust the angle of the saddle to the position 

that is most comfortable. You can also slide the saddle 

forward or backward to increase your comfort or to 

adjust the distance to the handlebar.

To adjust the saddle, 

loosen the nuts (B) 

on the saddle clamp 

a few turns, and then 

tilt the saddle upward 

or downward or slide 

the saddle forward 

or backward to the 

desired position. 

Then, retighten the 

nuts.

HOW TO ADJUST THE HORIZONTAL POSITION OF 

THE SADDLE

To adjust the position 

of the saddle, first 

loosen the carriage 

handle (C) and pull it 

outward. Then, move 

the saddle forward 

or backward, release 

the carriage handle, 

and then firmly 

tighten the carriage 

handle.

Note: The carriage handle (C) functions like a ratchet. 

Turn the carriage handle in the desired direction, pull it 

outward, turn it in the opposite direction, push it inward, 

and then turn it in the desired direction again. Repeat 

this process as many times as necessary.

A

A

B

C

HOW TO USE THE EXERCISE BIKE

Содержание PRO-FORM LE TOUR DE FRANCE CLC





























Отзывы: