ICON Health & Fitness Pro-Form Carbon E7 Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 40

33

HOW TO ADJUST THE REED SWITCH

If the console does not display correct feedback, the
reed switch should be adjusted. To adjust the reed
switch, first

press the power switch and unplug the

power cord.

Next, using
a standard
screwdriver,
carefully pry off
the left Disc (71).

Locate the Reed Switch (38). Turn the Pulley (19) until
a Magnet (43) is aligned with the Reed Switch.

Next, slightly loosen the indicated two #8 x 1/2" Flange
Screws (50). Slide the Reed Switch (38) slightly closer
to or away from the Magnet (43), and then retighten
the Flange Screws.

Then, plug in the power cord, press the power switch,
and rock the Pulley (19) forward and backward just
enough that the Magnet (43) passes the Reed Switch
(38) repeatedly. Repeat these actions until the console
displays correct feedback.

When the reed switch is correctly adjusted, reattach
the left disc and plug in the power cord.

HOW TO ADJUST THE DRIVE BELT

If the pedals slip while you are pedaling, even while
the resistance is adjusted to the highest level, the drive
belt may need to be adjusted. To adjust the drive belt,
first

press the power switch and unplug the power

cord.

Next, locate the
Access Cover
(3) on the Right
Shield (74).
Remove the
M4 x 16mm
Screw (101) and
then remove the
Access Cover.

Next, locate
and loosen the
Idler Screw (89).
Tighten the Drive
Belt Adjustment
Screw (91) until
the Drive Belt
(113) is tight.
Then, retighten
the Idler Screw.

Reattach the parts that you removed. Then, plug in the
power cord.

71

19

43

50

38

74

3

101

113

91

89

«
...
31
32
33
34
35
...
»

Содержание Pro-Form Carbon E7









































Отзывы:

Нет отзывов

Похожие инструкции для Pro-Form Carbon E7

Бренд: SPORTSTECH Страницы: 149

Resolute RSL 621

Бренд: Precor Страницы: 16

Resolute RSL 605

Бренд: Precor Страницы: 14

Resolute RSL 515

Бренд: Precor Страницы: 14

Бренд: Sunny Health & Fitness Страницы: 14

Бренд: BH Hipower Страницы: 39

Aeroflyer HRAW56071

Бренд: Healthrider Страницы: 16

8.5 Ex Crosstrainer El Elliptical

Бренд: Healthrider Страницы: 32

AeroFlyer HRAW56070

Бренд: Healthrider Страницы: 16

WATER STREAM II

Бренд: Hammer Страницы: 27

PRO-FORM Perspective 1000

Бренд: ICON Страницы: 32

Exercise Bike Lifecycle 8500

Бренд: Life Fitness Страницы: 35

Бренд: V-fit Страницы: 24

InMotion 55-1602

Бренд: Stamina Страницы: 19

Бренд: Nautilus Страницы: 56

Бренд: Trojan Страницы: 16

Бренд: Trojan Страницы: 24

ELLIPTI-PRO 300

Бренд: Trojan Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды