ICON Health & Fitness PFEL51016.7 Скачать руководство пользователя

Страница: 33 / 40

See the lower drawing on page 32. Plug in the

power cord, press the power switch to the reset posi-

tion, and rock the Pulley (19) forward and backward

just enough that the Magnet (43) passes the Reed

Switch (38) repeatedly.

Repeat these actions until the console displays correct

feedback. When the reed switch is correctly adjusted,

press the power switch to the off position, unplug the

power cord, and reattach the left disc.

HOW TO ADJUST THE DRIVE BELT

If the pedals slip while you are pedaling, even while

the resistance is adjusted to the highest level, the drive

belt may need to be adjusted.

To adjust the drive belt, first press the power switch

to the off position and unplug the power cord.

See assembly step 16 on page 15. Use a standard

screwdriver to remove the Shield Cover (75) and the

Shield Cover Cap (118).

See assembly step 15 on page 15. Remove

the Right Upper Body Leg Outer and Inner Covers

(69, 83).

See assembly step 12 on page 13. Remove the

Right Pedal Arm (58) from the Right Upper Body

Leg (60).

Next, remove the M8 x 16mm Screw (95), the Axle

Cover (53), and the M8 Washer (not shown) from the

right Crank Arm (20). Then, carefully remove the Right

Pedal Arm (58) and the Right Roller Arm (59) from the

elliptical.

See EXPLODED DRAWING C on page 39. Identify

the Left and Right Shields (73, 74). Remove the

M4 x 19mm Tek Screws (5), the M4 x 19mm Screws

(127), and the M4 x 48mm Screw (107) from the Left

and Right Shields; make sure to note the location of

each size of Screw. Then, remove the Right Shield.

Next, locate and loosen the Idler Screw (89), tighten

the Belt Adjustment Screw (91) until the Drive Belt

(113) is tight, and then, retighten the Idler Screw.

Reattach the right shield, the right roller arm, the right

pedal arm, the shield cover cap, and the shield cover.

Then, plug in the power cord.

113

Содержание PFEL51016.7









































Результаты поиска

Содержание PFEL51016.7

Отзывы:

Похожие инструкции для PFEL51016.7

Бренды по названию

Популярные бренды

ICON Health & Fitness PFEL51016.7, Руководство пользователя

Результаты поиска

Содержание PFEL51016.7

Отзывы:

Похожие инструкции для PFEL51016.7

Бренды по названию

Популярные бренды