background image

19

HOW TO ADJUST THE POSITIONS OF THE 

PEDALS

Each pedal (G) can be adjusted to several positions. 

To adjust each pedal, simply pull the pedal handle (H) 

outward, move the pedal to the desired position, and 

then release the pedal handle into an adjustment hole 

beneath the pedal. Make sure to adjust both pedals 

to the same position. 

HOW TO EXERCISE ON THE ELLIPTICAL

See the drawing at the right. To mount the elliptical, 

hold the handlebars (I) or the upper body arms (J) and 

step onto the pedal (G) that is in the lower position. 

Then, step onto the other pedal. Push the pedals until 

they begin to move with a continuous motion. Note: 

The pedals can turn in either direction. It is recom-

mended that you turn the pedals in the direction 

shown by the arrow; however, for variety, you can 

turn the pedals in the opposite direction.

To dismount the elliptical, wait until the pedals (G) 

come to a complete stop. Note: The elliptical does 

not have a free wheel; the pedals will continue to 

move until the flywheel stops. When the pedals are 

stationary, step off the higher pedal first. Then, step off 

the lower pedal.

H

G

I

J

G

Содержание PFEL51016.7









































Отзывы: