![background image](http://html.mh-extra.com/html/icon-health-and-fitness/jmtbw10-0/jmtbw10-0_user-manual_613256009.webp)
9
ADJUSTING THE INCLINE
To change the resistance of the weight training sys-
tem, you can also adjust the incline.
To adjust the incline, first lift the Top Frame (1) and
pull the indicated Knob (14) outward.
Slide the Adjustment Bracket (48) to the desired
position, and release the Knob (14) into one of the
adjustment holes in the Adjustment Leg (5).
Make
sure that the Knob is engaged in an adjustment
hole.
ADJUSTING THE RESISTANCE
To increase the resistance of the weight training
system, pull an 8mm or 10mm Bungee Cord (35,
44) outward from the Bungee Bracket (not shown)
and hook it onto the bar on the Bottom Frame (2).
For more resistance, hook additional Bungee Cords
(35, 44) onto the bar on the Bottom Frame (2).
5
14
48
Adjustment
Holes
1
STORING THE WEIGHT TRAINING SYSTEM
To store the weight training system, first see
ATTACHING THE FOOT BRACKET OR THE
HANDLEBAR on page 8. Remove the four L-pins
(17), and then remove the Handlebar (29) and the
Foot Bracket (8).
Next, pull the indicated Knob (14) outward, slide the
Top Frame (1) onto the Bottom Frame (2) as far as
possible, and release the Knob into the hole in the
Bottom Frame.
Then, see ADJUSTING THE INCLINE above and
move the Adjustment Leg (5) to the indicated
adjustment hole.
To use the weight training system, pull the indicated
Knob (14) outward, extend the Top Frame (1) as far
as possible, and then release the Knob into the
hole in the Bottom Frame (2).
Make sure that the
Knob is engaged in the hole in the Bottom
Frame.
Then, see ADJUSTING THE INCLINE above, and
move the Adjustment Leg (5) to the desired incline
position.
35, 44
2
14
1
2
5
Storage
Position
Содержание . JMTBW10.0
Страница 13: ...13 NOTES ...