icoms TMA-296, Руководство пользователя

Страница: 15 / 20

15
<+|- > is the character '+' (approaching traffic or '-' (receding traffic) in ASCII,
SSS (3 decimal digits in ASCII) is the measured speed in the current speed unit.
<SP>
is the space character in ASCII
(km/h|mph) (4 chars) is the current speed unit
DDD (3 decimal digits in ASCII) is the measured range in the current range unit.
<SP>m is the space character in ASCII followed by the current range unit (meter)
<CR> is the carriage return character in ASCII and
<LF> is the line feed character in ASCII.
2.2.4.2 Message minimum speed ([pnum] 51)
Description Minimum speed above which a measurement message will be sent.
Notes The minimum radial speed for target validation is 3.5 km/h.
2.2.4.3 Message maximum speed ([pnum] 52)
Description Maximum speed below which a measurement message will be sent.
Notes
The minimum radial speed for target validation is 3.5 km/h.
2.2.4.4 Message direction ([pnum] 53)
Description Direction(s) for which a measurement message will be sent.
Notes
•
0: receding vehicles
•
1: approaching vehicles
•
2: bidirectional
2.2.4.5 Message minimum range ([pnum] 54)
Description Minimum range above what a measurement message will be sent.
Notes
2.2.4.6 Message maximum range ([pnum] 55)
Description Maximum range below what a measurement message will be sent.
Notes
2.2.4.7 Track selection ([pnum] 56)
Description As the detector can detect a few vehicles simultaneously, this parameter specifies the one that
will be sent on the serial port as measurement.
Notes
•
0: Closest vehicle
•
1: Fastest vehicle
•
2: Slowest vehicle
•
3: Best Signal-to-Noise Ratio (SNR), i.e. the vehicle reflecting the most
2.2.5 Relay output parameters (K1|K2)
2.2.5.1 Contact (K1|K2) minimum speed ([pnum] 61|81)
Description
Minimum speed above what the contact sequence will be triggered.
Notes The minimum radial speed for target validation is 3.5 km/h.
2.2.5.2 Contact (K1|K2) maximum speed ([pnum] 62|82)
Description Maximum speed under what the contact sequence will be triggered.
Notes The minimum radial speed for target validation is 3.5 km/h.