iComfort SAU1455-H, Руководство пользователя

Страница: 18 / 46

16
OPERAtION 9.
Sauna Control Panel
Press POWER ON/OFF one time on the inside or outside control panel. POWER 1.
light will go on. the tIMER display will flash the number 90 and the tEMPERAtURE
display will flash the number 60.
Set up the heating time and temperature
2.
Press the tIMER ’
▲
’ or ‘
▼
’ button to increase or decrease the heating time of the
iComfort sauna. If you press this button continuously for more than 2 seconds,
the tIMER setting will change rapidly. Press the tEMPERAtURE ’
▲
’ or ‘
▼
’ button
to increase or decrease the desired temperature of the iComfort sauna. If you
press this button continuously for more than 2 seconds, the tEMPERAtURE display
setting will change rapidly. If you stop pressing the tEMPERAtURE button for more
than 5 seconds, both the time and temperature settings will be memorized for the
next sauna session. Once done, press the StARt/StOP HEAtING button and your
sauna session will start.
Switch between °F and °C
3.
Change the display between “°C” for Celsius and “°F” for Fahrenheit at your
convenience.
to stop heating
4.
Press the StARt/StOP HEAtING button. the heating elements will turn off.
lnternal reading lamp
5.
Press the reading light ON/OFF button to turn on. Press again to turn off.
External lamp
6.
Press on the external light ON/OFF button to turn on. Press again to turn off.
Note: When the environmental temperature is low, the heating time will take longer.
It is also possible the sauna temperature display is not able to reach its maximum
temperature. this is normal and does not in any way affect the performance of the
infrared heaters or their health benefits. the sauna temperature sensor only measures
the heat radiated by the heating elements. It does not measure the infrared heater’s
penetrating heat and this is where most of the health benefits are.
07m2_manuel_SAU1455-H_2009_10970.indd 16 4/7/09 4:38:48 PM