1
ACCESSORIES
1-4
Belt clip
D
Before attaching or detaching the belt clip, remove the
battery pack if it is attached.
To attach the belt clip:
Slide the belt clip in the direction of the arrow until
➥
the belt clip locks and makes a ‘click’ sound.
To detach the belt clip:
Lift the tab up (
➥
q
), and slide the belt clip in the direc-
tion of the arrow (
w
).
Accessory attachments (Continued)
Connector cover
D
To attach the connector cover:
Place the connector cover over the multi-connector.
q
(
q
)
Tighten the screw. (
w
w
)
To detach the connector cover:
Remove the screw using a Phillips screwdriver. (
q
e
)
Detach the connector cover to connect optional
w
equipment. (
r
)
Belt clip
w
q
Tab
r
e
q
w
CAUTION:
Attach the connector cover when the optional ac-
cessory is not used. Otherwise, the terminals of the
multi-connector may be shorted, and this could dam-
age the transceiver.
