BASIC OPERATION
3
14
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
BASIC MANUAL
■
Selecting the Frequency Selecting mode
D
VFO mode
Rotate [DIAL] to set an operating frequency.
L
In the VFO mode,
is displayed.
D
Memory mode
Select a Memory channel where an operating frequency and other parameters are saved.
L
In the Memory mode,
and the Memory Channel number are displayed.
D
Call Channel mode
Select a Call Channel to recall your most-often used frequencies quickly.
L
In the Call Channel mode,
and the Call Channel number are displayed.
D
Weather Channel mode (For only the ID-52A)
Weather Channels are used for monitoring Weather Channels from the National
Oceanographic and Atmospheric Administration (NOAA) broadcasts.
L
In the Weather Channel mode,
is displayed.
1. Select a mode.
L
Information
•Push [VFO/MHz] to select the VFO mode.
•In the VFO mode, push [VFO/MHz] to select the 1 MHz tuning step.
•Push [MR] to select the Memory mode.
•Hold down [CALL] for 1 second to select the Call Channel mode.
•For only the ID-52A, push [MR] in the Memory mode to select the Weather Channel
mode.
2. Rotate [DIAL] to select an operating frequency or a channel.
VFO mode
Call Channel
mode
Weather Channel
mode
Memory mode
■
DR function operation
Using the D-STAR Repeater (DR) function, you can easily
select the entered repeaters and Your call signs by rotating
[DIAL]. You can make not only a repeater call but also a
simplex call.
Hold down [DR] for 1 second.
•Displays the DR screen.
L
Hold down [DR] again to cancel the DR function.
L
