background image

INITIAL SETUP

2

6

1

7

4

10

15

18

2

8

13

5

11

16

3

9

14

6

12

17

BASIC MANUAL

 

Charging the battery pack

 

D

Capacity of the battery pack

ICON

BATTERY STATUS

 The battery has sufficient capacity.

 The battery is exhausted a little.
 The battery is nearing exhaustion.

Blinking  The battery is almost fully exhausted.

NOTE:

 •

Prior to using the transceiver for the first time, the battery pack must be fully charged for 

optimum life and operation.

 

BE SURE

 to turn OFF the transceiver while charging with the supplied battery charger. 

Otherwise, the attached battery pack cannot be charged.

 •While charging, the charging icon “

” and “Charging....” are displayed.

 •The icon and “Charging....” disappear when the battery pack is fully charged.

NOTE: BE SURE

 to attach the battery 

pack before connecting the Battery 

charger.

To [DC IN]

To an AC outlet

BP-271

 (Supplied)

BC-167S

 

L

The shape is different and supplied or 

optional, depending on the charger version.

Turn OFF

Charging time:

  Approximately 3 hours 

 

(When charging the BC-271 with the BC-167S)

 

L

See the Advanced manual about the optional battery packs and chargers.

Содержание ID-52A

























































































Отзывы: