38
7
SCAN OPERATION
■
Auto-memory write scan
This scan is useful for searching a specified frequency range
and automatically storing busy frequencies into memory
channels. The auto-memory write scan is performed any VFO
scan types (ALL, BAND, PROG).
q
Select VFO mode with
[VFO MHz]
.
w
Push and hold
[MODE SCAN]
to enter scanning type se-
lection condition.
e
Rotate
[R-DIAL]
to select the desired scanning type.
• “ALL” for full scan; “BAND” for band scan, “PROG-xx” for pro-
grammed scan (xx= 0 to 24; programmed scan edges numbers
only displayed)
r
Release
[MODE SCAN]
to start the scan.
t
Push
[MR S.MW]
to turn the automatic memory write func-
tion ON and OFF.
• “
µ
” indicator blinks.
y
Push
[DUALWATCH]
to stop the scan.
D
D
During auto-memory write scanning:
• When signal is received, scan pauses and the frequency is
stored into auto-memory write channel group (
å
000–199).
- 2 short beeps sound when stored.
• Scan resumes after frequency storing.
• When all channels are stored, the scan is canceled auto-
matically and 1 long beep sounds.
D
D
Recalling the stored frequencies:
q
Push
[MR S.MW]
several times to select the auto-memory
write channel group.
• “
å
” appears.
e
Rotate
[R-DIAL]
to select the desired channel.
D
D
Clearing the stored frequencies:
q
Select the auto-memory write channel group.
w
Push
[5 SKIP]
for 1 sec. to clear the all channels contents.
• 1 short and 1 long beeps sound.
NOTE:
The auto-memory write channel contents CANNOT
be cleared by an independent channel. Thus it is good idea
to copy the contents into regular memory channel.
√
å
MODE
ANL
AFC
TSQL
FM
439 875
PSKIP
-DUP
001
“
å
” appears when auto memory
write channel group is selected.
√
µ
MODE
ANL
AFC
TSQL
FM
14
8 800
PSKIP
-DUP
001
• During auto memory
write scan
“ ” indicator blinks during
auto memory write scan.
[R-DIAL]
MODE
SCAN
MR
S.MW
µ
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
