26
6
MEMORY CHANNELS
■
General description
The receiver has 1050 memory channels including 50 scan
edge memory channels (25 pairs) for storage of often-used
frequencies. And a total of 26 memory banks, A to Z are avail-
able for usage by group, etc. Up to 100 channels can be as-
signed into a bank.
D
D
Memory channel contents
The following information can be programmed into memory
channels:
• Operating frequency (p. 14)
• Receive mode (p. 16)
• Duplex direction (+DUP or –DUP) with an offset fre-
quency (p. 20)
• Tone squelch or DTCS squelch ON/OFF (p. 45)
• Tone squelch frequency or DTCS code with polarity
(p. 46)
• Scan skip information* (p. 39).
■
Memory channel programming
q
Push
[VFO MHz]
to select VFO mode.
w
Set the desired frequency:
➥
Select the desired band with
[BAND]
.
➥
Set the desired frequency with
[R-DIAL]
.
➥
Or set the desired frequency with
[KEYPAD]
.
➥
Set other data
(e.g. offset frequency, duplex direction, tone
squelch, etc.)
, if desired.
e
Push
[MR S.MW]
for 1 sec. to select the select memory
write condition.
• 1 short and 1 long beep sound.
• “
µ
” indicator blinks.
r
Rotate
[R-DIAL]
to select the desired channel.
• Scan edge channel, 00A/B to 24A/B can also be selected.
t
Push
[MR S.MW]
for 1 sec.
• 3 beeps sound
• Memory channel number automatically increases when contin-
uing to push
[MR S.MW]
after programming.
[EXAMPLE]:
Programming 145.870 MHz into memory channel 20 (blank channel).
√
µ
MODE
ANL
AFC
TSQL
TSQL
FM
FM
145 870
PSKIP
-DUP
-DUP
001
√
µ
MODE
ANL
AFC
TSQL
TSQL
FM
145 870
PSKIP
-DUP
-DUP
020
√
µ
MODE
ANL
AFC
TSQL
TSQL
FM
145 870
PSKIP
-DUP
-DUP
020
>
CLEAR
CLEAR
-
SKIP
SKIP
-
:OFF
:OFF
-
MNAME:
MNAME:
-BNAME:
-BNAME:
-
BANK
BANK
-
:----
:----
001
001
µ
.
146.010
FM
>
CLEAR
CLEAR
-
SKIP
SKIP
-
:OFF
:OFF
-
MNAME:
MNAME:
-BNAME:
-BNAME:
-
BANK
BANK
-
:----
:----
020
020
µ
.
----------------
----------------
Push for 1 sec.
Rotate
MR
S.MW
Push for 1 sec.
MR
S.MW
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16