Icom IC-R20, Инструкция по эксплуатации

Страница: 38 / 88

31
6
MEMORY CHANNELS
■
Copying memory contents
This function transfers a memory channel’s contents to VFO
(or another memory channel). This is useful when searching
for signals around a memory channel frequency and for re-
calling the offset frequency, subaudible tone frequency etc.
D
Memory
➪
VFO
q
Select the memory channel to be copied.
➥
Push [MR S.MW] to select memory mode, then rotate
[R-DIAL] to select the desired memory channel.
• Select the bank channel with [BAND] and [R-DIAL] , if desired.
w
Push [MR S.MW] for 1 sec. to select the select memory
write condition.
• 1 short and 1 long beep sound.
• “
µ
” indicator blinks.
e
Push [VFO MHz] to select “VFO.”
• Rotate [R-DIAL] can also select “VFO.”
r
Push [MR S.MW] for 1 sec. to write the selected channel
contents to VFO mode.
• Returns to VFO mode automatically.
Pushing [MR S.MW] for 2 sec. at the step
w
, can also be
copied the memory contents to VFO. In this case, the
steps
e
and
r
are not necessary.
D
Memory
➪
memory
q
Select the memory channel to be copied.
➥
Push [MR S.MW] to select memory mode, then rotate [R-
DIAL] to select the desired memory channel.
w
Push [MR S.MW] for 1 sec. to select the select memory
write condition.
• 1 short and 1 long beep sound.
• “
µ
” indicator blinks.
• Do not hold [MR S.MW] for more than 1 sec. otherwise the
memory contents will be copied to VFO.
e
Rotate [R-DIAL] to select the target memory channel.
r
Push [MR S.MW] for 1 sec. again to copy.
[EXAMPLE]: Copying channel 20 to 51.
√ µ
MODE ANL
AFC TSQL TSQL
FM
FM FM
145 870
PSKIP
-DUP -DUP
TSQL TSQL
-DUP -DUP
020 √ µ
MODE ANL
AFC TSQL TSQL
FM
145 870
PSKIP
-DUP -DUP
051
> CLEAR CLEAR
- SKIP SKIP - :OFF :OFF
- MNAME: MNAME:
-BNAME: -BNAME:
- BANK BANK - :---- :----
020 020
µ
.
145.870
FM
> CLEAR CLEAR
- SKIP SKIP - :OFF :OFF
- MNAME: MNAME:
-BNAME: -BNAME:
- BANK BANK - :---- :----
051 051
µ
.
---------------- ----------------
Select memory
channel
Push for 1 sec. Rotate
MR
S.MW
MR
S.MW
Push for 1 sec.
MR
S.MW