background image

88

11

MENU ITEMS

New2001

 

D

 

Power Switch from sub unit

 

(Configuration > 

Power SW from Sub Unit:

)

Select weather or not to turn OFF the transceiver at same 

time that you turn OFF the command microphone or 

command head. 

(Default: All Units)

 

L

 The optional HM-195 or HM-229 command microphone or  

RC-M600 

command

 

head

 is required to use this function.

All Units:    When you turn OFF the command microphone or 

command head, the transceiver is turned OFF at 

same time.

Own Unit:   The transceiver is not turned OFF even if you 

turn OFF the command microphone or command 

head.

 

Radio Settings

 

D

Scan Type 

(Except for the Dutch version)

  (Radio Settings > 

Scan Type

)

Select the Scan type to locate signals.

• Normal Scan:  Sequentially searches all Favorite channels.

     

(Default for the USA version.)

• Priority Scan:   Sequentially searches all Favorite channels, 

while also monitoring Channel 16.

     

 (Default for the transceiver other than USA 

version.)

 

D

Scan Timer 

(Except for the Dutch version)

  (Radio Settings > 

Scan Timer

)

Turn the Scan Resume timer ON or OFF.

• On: 

 When a signal is detected on a channel, the scan 

pauses for 5 seconds, and then resumes. 

 

If the signal disappears in less than 5 seconds, the 

scan immediately resumes. 

• Off: 

 When a signal is detected on a channel, the scan 

pauses until the signal disappears, and then 

resumes. (Default)

Содержание IC-M605E































































































































Отзывы: