51
8
DSC OPERATION
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1.
When an Individual call is received:
• Alarm sounds.
• The following screen is displayed
and the backlight blinks.
•
“
” blinks.
2.
Push any [Alarm Off]
.
3.
Select your action.
[Ignore]*: Ignores the Call and
returns to the Main screen.
* Displayed only when
“Single” is selected in the
PROCEDURE menu.
[Hold]: Holds the RX call task,
and returns to the Main
screen.
[Able]: Sends an acknowledgment
without any changes.
[Accept]: Enters the DSC Task
mode.
•
Rotate [CH/ENT] to view the call
contents.
NOTE:
When the “Individual
ACK” item is set to “Auto,” the
transceiver automatically sends an
acknowledgement. Both the TX and RX
calls are stored in the Transmitted and
Received Call Logs. (pp. 58, 59)
When you select [Accept]
in step
3, you can send an acknowledgement
in the DSC Task mode. To send the
acknowledgement, go to step 4.
If you return to the Main screen
without sending the acknowledgement,
go to step 7.
4.
Push the key to select an
acknowledgement option.
5.
Push [Call]
to s
end the
Individual acknowledgement.
6. Depending on the option selected
in step 5, hold down [PTT] to
communicate.
7.
Push [Standby]
to return to
the Main screen.
D
Receiving an Individual call
TIP:
When you send the
acknowledgement, select one of three
options, depending on your situation.
See page 39 for details of the
Individual acknowledgement
procedures.
