40
7
OTHER FUNCTIONS
New2001
• While in the intercom mode, the transceiver functions
(transmit and receive) are interrupted. If the transceiver
is in transmit condition, the intercom function is not avail-
able.
• When a DSC call is received, the intercom function is in-
terrupted with an automatic return to the transceiver
mode. The transceiver’s display indicates ‘Receiving DSC
calls.’ (p. 32)
■
Hailer operation
The IC-M603 has a 2-way hailer function for voice amplification
and reception over a loudspeaker, making it unnecessary to
leave the bridge to hear a hailing party. During hailer operation,
transmitting is impossible and the received signal is muted.
Connect an external hailer speaker as described on p. 46.
q
Push
[
F
]
, then push
[7•
]
to enter hailer mode.
w
Push and hold
[PTT]
and speak at a normal voice level
into the microphone.
• “
T
TA
AL
LK
K
” or “
L
LI
IS
ST
TE
EN
N
” appears on the caller or listener function
display, respectivery.
• To adjust the hailer level, rotate
[SELECTOR]
.
e
After releasing
[PTT]
you can hear the response through
the speaker.
r
To return to normal operation, push
[CLR]
or repeat step
q
.
• While in the hailer mode, the transceiver functions (trans-
mit and receive) are interrupted. If the transceiver is in
transmit condition, the hailer function is not available.
• When a DSC call is received, the hailer function is inter-
rupted with an automatic return to the transceiver mode. The
transceiver’s display indicates ‘Receiving DSC calls.’ (p 32)
HAILER
HAILER
LISTEN
LISTEN
15
15
then push
Push ,
HAIL
!IC-M603.qxd 06.7.28 1:46 PM Page 40 (1,1)