Icom IC-M603 Скачать руководство пользователя страница 52

Страница: 52 / 64

CONNECTIONS AND MAINTENANCE

New2001

■

Connections

ANTENNA CONNECTOR

Connects a marine VHF antenna with a PL-259 connector
to the transceiver.

CAUTION:

Transmitting without an antenna will damage

the transceiver.

MICROPHONE CONNECTOR

Connect the supplied microphone only.

CAUTION: NEVER

connect other microphones here,

such as the optional HM-162E, for they may cause dam-
age to the transceiver.

HAILER/FOGHORN CONNECTOR

Connects a hailer speaker (30 W nominal at 13.8 V/ 4

Ω

EXTERNAL MICROPHONE CONNECTORS
[COMMAND MIC-1]/[COMMAND MIC-2]

Connects the optional COMMANDMICIII™ (HM-162E.)

CAUTION: NEVER

connect other microphone here, such

as the HM-134, may cause damage to the transceiver.

GPS RECEIVER/EXTERNAL SPEAKER CONNECTOR

➥

Connects a GPS receiver for position and time indica-
tions.

• An NMEA0183 ver. 2.0 or 3.01 (sentence formatters RMC,

GGA, GNS, GLL) compatible GPS receiver is required. Ask
your dealer about suitable GPS receivers.

➥

Connects a PC or navigation equipment (NMEA0183
ver. 3.01 sentence formatters DSC, DSE compatible) for
plotting received other ships position data.

➥

Connects an external speaker.

NOTE:

Attach the supplied connector covers to

when they are not in use.

DC POWER CONNECTOR

Connects the supplied DC power cable from this connector
to an external 13.8 V DC power source.

NMEAOUT (+)
NMEAOUT (–)

NMEAIN (+)

NMEAIN (–)

SP (+)
SP (–)

Transceiver’s rear panel view

HAIL (+)

HAIL (–)

Transceiver’s
rear panel view

r
t

!IC-M603.qxd 06.7.28 1:46 PM Page 46 (1,1)

Содержание IC-M603

































































Результаты поиска

Содержание IC-M603

Отзывы:

Бренды по названию

Популярные бренды

Icom IC-M603, Инструкция по эксплуатации

Результаты поиска

Содержание IC-M603

Отзывы:

Бренды по названию

Популярные бренды