Icom IC-M506EURO, Инструкция по эксплуатации

Страница: 73 / 116

New2001
67
8
OTHER FUNCTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Intercom operation
■
The optional Intercom function allows you to talk between the
deck and the cabin. The optional HM-195
commandmic
IV
™ is
required for Intercom operation.
Connect the HM-195
commandmic
IV
™ as described on page
100.
• Transmitting is disabled while using the intercom.
• The received signal is muted while using the intercom.
q
Hold down [PWR](Dial) to turn ON the power.
• The command microphone power is automatically turned ON,
even if the power is OFF.
After releasing [INCM CALL], hold down [PTT] and speak
t
into the microphone at a normal voice level.
• “ TALK” appears on the caller’s display, or “LSTN” appears on the
listener’s display.
• To adjust the transceiver’s intercom volume level, rotate volume
dial
.
• To adjust the HM-195’s intercom volume level, rotate [VOL/SQL]
(Dial) on the HM-195.
After releasing [PTT], you can hear the response through
y
the speaker.
Push [EXIT] to return to normal operating screen.
u
While in the Intercom mode, the transmit and receive func-
tions are disabled. When the transceiver is transmitting,
the Intercom function is disabled.
On the caller’s display
On the listener’s display
w
Push [MENU].
e
Rotate dial or push [ Ω ]/[ ≈ ] to
select the “INCM,” icon and
then push the softkey below
the icon.
• INTERCOM screen is displayed.
• Push [BACK] to return to the pre -
vious screen.
r
Hold down [INCM CALL] to
sound the intercom beeps.
• The transceiver and the command
microphone sound beeps while
holding down [INCM CALL].
• “CALL” appears.