Icom IC-M402A, Инструкция по эксплуатации

Страница: 52 / 64

46
11
COMMANDMIC
®
HM-127
New2001
■
Setting tag channels
q
While pushing [H/L] , push [CH/WX•
U/I/C
] several
times to select the channel group (USA, INT, CAN), if de-
sired.
w
Push [
Y Y
] or [
Z Z
] to select the desired channel to set as a
tag channel.
e
Push [SCAN• ] for 1 sec. to set the displayed channel
as a tag channel.
• “ ” appears.
r
To cancel the tag channel setting, push [SCAN• ] for
1 sec.
• “ ” disappears.
✔
Clearing (or setting) all tagged channels
While pushing [H/L] , push [SCAN• ] for 3 sec. (until a long
beep changes to 2 short beeps) to clear all tag channels
setting in the channel group.
• Repeat above procedure to set all tag channels.
■
Starting a scan
q
While pushing [H/L] , push [CH/WX•
U/I/C
] several
times to select the channel group (USA, INT, CAN), if de-
sired.
• When the Weather alert function is in use, select the desired
weather channel with [CH/WX•
U/I/C
] and [
Y Y
] or [
Z Z
] .
w
Push [SCAN• ] to start Priority or Normal scan.
• “ SCAN ” appears during Normal scan.
• The priority channel readout indicates “ 16 ”, and “ P ” and “ SCAN ”
indicators appear during Priority scan.
• When a signal is received, scan pauses until the signal disap-
pears or resumes after pausing 5 sec. according to the Set mode
setting (Channel 16 is still monitored during Priority scan).
• Push [
Y Y
] or [
Z Z
] to check the scanning tag channels, to change
the scanning direction or resume the scan manually.
e
To stop the scan, push [SCAN• ] .
• “ SCAN ” disappears.
• Pushing [PTT] , [16•
9
] or [CH/WX•
U/I/C
] also stops the scan.
DW
TAG
TAG
DW
DW
TAG
TAG
TAG
DW
!IC-M402A_SA.qxd 03.11.11 2:52 PM Page 46 (1,1)