Icom IC-M402A Скачать руководство пользователя страница 33

Страница: 33 / 64

DSC OPERATION

New2001

Receiving an All Ships call

While monitoring Channel 70 and an All Ships call is received:

➥

The emergency alarm sounds when the category is ‘Dis-
tress’ or ‘Urgency’; 2 beeps sound for other categories.

➥

“

DSC

” appears and “

” scrolls at the channel

comment indicator.

➥

Push

[DSC•

]

to change to the channel specified by the

calling station for voice communication; push any other key
to ignore the All Ships call.

➥

Monitor the channel for an announcement from the calling
vessel.

Receiving a Geographical Area call

While monitoring Channel 70 and a Geographical Area call
(for the area you are in) is received:

➥

The emergency alarm or beeps sound depending on the
received category.

➥

“

DSC

” appears and “

” scrolls at the chan-

nel comment indicator.

➥

Push

[DSC•

]

to change to the channel specified by the

calling station for voice communication; push any other key
to ignore the Geographical Area call.

➥

Monitor the selected channel for an announcement from
the calling station.

When no GPS receiver is connected or if there is a prob-
lem with the connected receiver, all Geographical Area
calls are received, regardless of your position.

Scrolls

!IC-M402A_SA.qxd 03.11.11 2:52 PM Page 27 (1,1)

Содержание IC-M402A

































































Результаты поиска

Содержание IC-M402A

Отзывы:

Icom IC-M402A, Инструкция по эксплуатации, Страница: 33 / 64

Результаты поиска

Содержание IC-M402A

Отзывы: