Icom IC-M402A, Инструкция по эксплуатации

Страница: 50 / 64

44
11
COMMANDMIC
®
HM-127
New2001
■
Call channel programming
q
Push [CH/WX•
U/I/C
] several
times while pushing [H/L] to select
the desired channel group (USA,
INT, CAN) to be programmed.
w
Push [16•
9
] for 1 sec. to select call
channel of the selected channel
group.
• “ CALL ” and call channel number ap-
pear.
e
Push [16•
9
] again for 3 sec. (until
a long beep changes to 2 short
beeps) to enter call channel pro-
gramming condition.
• The channel number and channel
group to be programmed blinks.
r
Push [
Y Y
] / [
Z Z
] to select the desired
channel.
t
Push [16•
9
] to program the dis-
played channel as call channel.
• The channel number and channel
group stop blinking.
■
Lock functions
The Lock function electronically locks keys and switches to
prevent accidental changes and function access from the mi-
crophone.
• All keys, switches and controllers on the transceiver are functional.
D D
Activating the Lock function
➥
While pushing [H/L] , push
[SQL•
L
] to turn the Lock
function ON or OFF.
• “ ” appears.
• Only [PWR] , [PTT] , [H/L] ,
[SQL•
L
] , [VOL] + [
Y Y
] / [
Z Z
]
and [SQL] + [
Y Y
] / [
Z Z
] are func-
tional.
D D
Activating the All key lock function
➥
While pushing [H/L] , turn the
power ON by pushing [PWR]
to turn the All key lock function
ON or OFF.
• “ ” blinks.
• Only [PWR] and [PTT] are func-
tional.
MONI
MONI
DW
Appears when the lock
function is in use.
Blinks when the all lock
function is in use.
!IC-M402A_SA.qxd 03.11.11 2:52 PM Page 44 (1,1)