Icom IC-M25, Инструкция по эксплуатации

Страница: 17 / 48

Selecting Channel 16
❏
Channel 16 is the distress and safety channel. It is used for
establishing initial contact with a station, and for emergency
communications. While in the standby, you must monitor
Channel 16.
Push
q
[16/C] to select Channel 16.
Push
w
[CH/WX] to recall the channel that was displayed
before selecting Channel 16.
Selecting Call channel
❏
Each channel group has a Call channel.
Hold down
q
[16/C] for 1 second to select the Call channel
of the selected channel group.
• “
CALL” and the Call channel number appear.
Push
w
[CH/WX] to recall the channel that was displayed
before selecting Channel 9.
NOTE: You can set your most often-used channel. See page 13.
❏
Weather channels
(
For USA, EXP, CHN and AUS versions.)
The transceiver has 10 weather channels. These are used
for monitoring the broadcasts from the National Oceanic and
Atmospheric Administration (NOAA).
Push
q
[CH/WX] once or twice to select the Weather
channel group.
• “
WX” appears when a weather channel is selected.
Push
w
[ Y ] or [ Z ] to select a weather channel.
About the Weather Alert function:
A NOAA broadcast station
transmits a weather alert tone
before any important weather
announcements.
The Weather Alert function
automatically detects a weather
alert tone on the selected
weather channel.
See page 18 for details.
9
4
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Push
Hold down
for 1 second
Push once or twice.
A weather channel is selected.
Weather Alert function is ON.