29
3
APCO P25 MODE OPERATION
n
Status Message
D
Transmitting
The transcever can send one of up to 100 dfferent pre-pro-
grammed Status Messages.
[Digital Button]
or
[Digital Status]
key assgnment s neces-
sary to transmt the Status Message.
Not avalable on Non-dsplay types.
✔
For Trunking mode operation:
The Status Message can be sent only to a dspatcher n the
Trunkng mode.
q
Push
[Digital Button]
to enter the dgtal call type selec-
ton mode.
✔
Quick access
Push
[Digital Status]
to drectly enter the Status Mes-
sage selecton mode. In ths case, skp steps
w
and
e
.
Go to step
r
.
w
Push
[CH Up]
or
[CH Down]
, or rotate
[CH Up/Down]
to
select “
STATUS
.”
For Handheld types:
For Mobile types:
STATUS
DSEL PAGE STAT
S T A T U S
e
Push
[Digital Button]
agan to enter the Status Message
selecton mode.
• A pre-programmed Status Message s dsplayed.
For Handheld types:
For Mobile types:
STATUS
TX Status 01
DSEL PAGE STAT
S T A T U S
T X
S t a t u s
0 1
r
Push
[CH Up]
or
[CH Down]
, or rotate
[CH Up/Down]
to
select the desred Message.
Whle n the Trunkng mode, the followng steps
t
and
y
are not necessary. Go to step
u
.
t
Push
[Digital Button]
(or
[Digital Status]
) agan to enter
the Indvdual ID selecton mode.
• A pre-programmed ID name s dsplayed.
• When the ID name s not programmed, the ID code s ds-
played.
For Handheld types:
For Mobile types:
STATUS
INDIVIDUAL1
DSEL PAGE STAT
S T A T U S
I N D I V I D U A L 1