D
Transmitting an Emergency call along with
an Emergency alarm
q
Push and hold
[Emergency]
*
1
for the specfied tme pe-
rod*
2
to enter the emergency mode.
• The countdown starts mmedately.
w
After the specfied tme perod*
2
has passed, the trans-
cever automatcally, and repeatedly, transmts an Emer-
gency alarm.
• To ext the emergency mode, push and hold
[Emergency]
agan
before transmttng an Emergency alarm.
• After recevng an acknowledgement, “
ACK RECEIVED
” s ds-
played (Smple and 10-key types only), and dependng on the
pre-settng, the transcever exts the emergency mode.
• When an acknowledgement s not receved, “
NO ACKNOWLDG
”
s dsplayed. (Smple and 10-key types only) And dependng on
the pre-settng, the transcever automatcally transmts the mcro-
phone audo (Auto TX).
e
Push and hold
[PTT]
to transmt an Emergency call.
• The Busy/Transmt ndcator
(for Handhelds) or Transmt ndca-
tor (for Mobles) lghts red.
r
To ext the emergency mode, turn the power OFF.
*
1
The emergency repeat cycle must be set to ‘2’ or above.
*
2
Dependng on the pre-settng. Ask your dealer for detals.
D
Receiving an Emergency alarm
An Emergency alarm can be receved only whle n the Con-
ventonal mode.
An emergency alarm decode acton and automatc acknowl-
edgement capablty should be enabled by your dealer wth
the CS-F9010/F9510
cloning
software
. Ask your dealer for
detals.
q
When an Emergency alarm s receved;
• The Busy/Transmt ndcator
(for Handhelds) or Busy ndcator
(for Mobles) lghts green.
• The rnger sounds.
• “
EA RECEIVED
” and the callng staton ID (or name) blnk. (Sm-
ple and 10-key types only)
For Handheld types:
For Mobile types:
EA RECEIVED
INDIVIDUAL1
DSEL PAGE STAT
E A
R E C E I V E D
I N D I V I D U A L 1
The calling station ID name
w
An acknowledgement s automatcally transmtted.
• The Busy/Transmt ndcator
(for Handhelds) or Transmt ndca-
tor (for Mobles) lghts red.
e
Push any key (except for
[
]
) to stop the dsplay from
blnkng and return to normal operaton.
39
3
APCO P25 MODE OPERATION