29
4
SELCALL/ALE OPERATION
4
2001 NEW
D
Simple Selcall operation
The Simple Selcall mode is convenient to transmit the
often used Selcalls.
q
Push
[
]
to enter the Simple Selcall mode.
• Depending on the Entry, the contents are skipped.
Holding down
[
]
enters
the normal Selcall mode.
See pages 19 to 28 for the normal Selcall operation de-
tails.
w
After setting is finished, push
[
r
]
or
[
s
]
to select
the Channel.
• Only the channels that belong to the selected Network,
are displayed.
• If desired, push
[Tests]
(
§§
) to transmit the Channel Test
call in this step.
e
Push
[
]
to transmit the Call.
• While calling, push
[
]
or
[PTT]
to cancel the call.
Depending on the Entry, following settings are required.
(
4
: Setting is required.
—
: The contents is skipped.)
Screen
(Entry)
Call system/
Network
Call type/
Call ID
Phone
Link
*
4
Message
*
5
Self ID
*
3
Channel
*
6
Note
Address
Emergency Link
—*
1
—*
3
—
—
—
4
The skipped contents are used
from the preset setting.
Call In
Call Out
—*
1
—*
3
—
—
—
4
The skipped contents are used
from the preset setting.
Phone Link
—*
1
4
4
—
—
4
The Call type is always set to
Phone.
The skipped contents are used
from the preset setting.
Other screen
— *
2
4
4
4
—
4
The skipped contents are used from
the previously transmitted Calls.
*
1
When the setting of the Entry is activated (Call is
possible), the content is skipped.
*
2
Priority Network is used.
*
3
When the preset ID or previously used ID exists in
the selected entry, the Call automatically selects the
ID and skips the contents.
*
4
Only Phone call.
*
5
Only Message call.
*
6
Only the channels that belong to the Network, are
displayed.