1
V4.01–
A-7264-2EX
iF8101
CI-V information— Ver. 4.01 or later
This information is discribed using Version 4.01 or later firmware. Earlier versions are some different.
Controller to IC-F8101
FE FE
8A
E0
Cn
Sc
Data area
FD
Preamb
le
code
(fix
ed)
Tr
ansceiv
er’
s
def
ault address
Controller’
s
def
ault address
Command number
(see the command tab
le)
Sub command number
(see the command tab
le)
BCD code data such as for frequency
, memor
y
number entr
y
(see the data content descr
iption)
End of message
code
(fix
ed)
OK message to controller
FE FE E0
8A
FB
FD
FE FE E0
8A
FA
FD
Preamb
le
code
(fix
ed)
Controller’
s
def
ault address
Tr
ansceiv
er’
s
def
ault address
OK code
(fix
ed)
End of message
code
(fix
ed)
NG message to controller
NG code
(fix
ed)
IC-F8101 to controller
q
w
e
r
t
y
u
FE FE
E0
8A
Cn
Sc
Data area
FD
q
w
e
r
t
y
u
The transceiver can be connected to a PC with a USB
cable. The Icom Communications Interface-V (CI-V)
controls the transceiver.
• A USB cable (A-B type, user supplied)
The required USB driver and driver install guide can be
downloaded from the Icom web site.
GO to “http://www.icom.co.jp/world,” then click “Support,”
“Firmware Updates / Software downloads” in sequence.
* The download procedure on the web page may
change without notice.
The CI-V system can be operated using the following
data formats. Data formats differ, depending on
command numbers. A data area or sub command is
added for some commands.
CI-V connection
Data format