6
1
PANEL DESCRIPTION
TX CODE CHANNEL SELECT KEY
➥
Push to enter the TX code channel selecton mode. Then
set the desred channel usng [CH Up]/[CH Down]. (p. 9)
➥
Whle n the TX code channel selecton mode, push and
hold ths key for 1 sec. to enter the TX code edt mode.
Then set the desred dgt usng [CH Up]/[CH Down].
(p. 10)
TX CODE CHANNEL UP/DOWN KEYS
Push to select a TX code channel drectly.
ID-MR SELECT KEY
(PMR operaton only)
➥
Recalls detected ID codes.
• Push ths key, then select the ID code usng [CH Up]/
[CH Down].
• Up to 5 ID’s are memorzed.
➥
Push and hold ths key for 1 sec. to erase the selected ID’s.
SCRAMBLER KEY
➥
Push to turn the voce scrambler functon ON and OFF.
USER SET MODE KEY
➥
Push and hold for 1 sec. to enter user set mode.
• Durng user set mode, push ths key to select an tem*, and
change the value or condton usng [CH Up]/[CH Down].
*Selectable tems may dffer dependng on the pre-settng.
➥
Push and hold ths key for 1 sec. agan to ext user set mode.
User set mode s also avalable va the ‘Power ON’ functon.
In ths case, all set mode tems are avalable. Refer to p. 11
also.
OPT 1/2/3 OUT KEYS
Push to control the output sgnal level from the optonal unt
connector.
OPT 1/2/3 MOMENTARY KEYS
Control the output sgnal level from the optonal unt connec-
tor whle pushng and holdng ths key.
Ext. CH Sel Mode KEY
Push to turn the Ext. CH Select functon ON or OFF.
When the functon s turned ON, memory channels can be
selected wth external nput operaton only.
When the functon s turned OFF, memory channels can be
selected wth [CH Up] or [CH Down] operaton, and cannot
wth external nput operaton.
• Ths functon s avalable when the external unt, such as a dm-
mer control s connected to the transcever wth an optonal cable,
OPC-1939 (p. 16).
• Ask your dealer for detals of external nput operaton.
