15
4
CONNECTION AND MAINTENANCE
■
Mounting the transceiver
The front panel can be inverted for correct viewing while leav-
ing the built-in speaker facing away from the mounting sur-
face.
D
Inverting the Front panel
q
Unscrew the 2-side screws.
w
Detach the Front panel forward from the transceiver.
e
Bend the flat cable between Front panel and main unit as
shown in the following diagram.
r
Invert the transceiver 180 degrees clockwise as below.
t
Re-attach the Front panel to the transceiver.
y
Tighten the 2 screws.
CAUTION:
•
NEVER
rotate the transceiver more than 180 degrees.
•
DO NOT
bend the flat cable too hard. Damage may occur.
normal bend line
inverted
bend line
Flat cable orientation
to Front panel
to MAIN unit
NOTE:
Be sure to bend the flat cable in the
correct direction, before turning
over (inverting) the transceiver.
IC-F521_F621-2.qxd 05.12.2 10:15 AM Page r (1,1)