![background image](http://html1.mh-extra.com/html/icom/ic-f5122d/ic-f5122d_operating-manual_4285683005.webp)
D
dPMR operations
The following key functions are useful for the dPMR opera-
tion.
STATUS UP, STATUS DOWN
➥
Push to select a status message.
➥
When the automatic scroll function is activated, push to
cancel it, if desired.
➥
When an SDM that includes more than 8 characters is dis-
played, push to manually scroll the message.
STATUS
➥
Push to enter the status message selection mode.
• Push
[CH Up]
or
[CH Down]
to select a desired message.
➥
Hold down for 1 second to transmit the last selected status
message.
MESSAGE
➥
Push to enter the SDM selection mode.
• Push
[CH Up]
or
[CH Down]
to select a desired SDM.
➥
While in the SDM selection mode, hold down for 1 second
to transmit the last selected SDM.
D
Additional key functions
• dPMR operations
The following key functions are recommended for the dPMR
operation, and function as described below.
CALL
On a digital channel, push to transmit a dPMR call.
Depending on the preprogrammed settings, pushing
[PTT]
makes a call in the same way as using
[Call]
. Moreover,
when you keep holding down
[PTT]
after receiving an ac-
knowledgement, you can start a conversation without
pushing it again.
TX CODE ENTER
Push to enter the ID code edit mode, and then set a desired
ID code. (p. 7)
MONITOR (AUDIBLE)
After communication is finished, push this key to send a ‘Clear
down’ signal to terminate the connection.
Depending on the preprogrammed settings, the Priority A
channel is automatically selected after a ‘Clear down’ sig-
nal terminates a connection.
2
1
PREPARATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16